WBT-0705 Ag, Nextgen

WBT's flagship terminal with compact design. Equipped with filigree signal conductor made from fine silver and constructed on the nextgen principle. Grants highest conductivity. Fully insulated. CE and IEC conformant. Accepts 4-mm bananas, spades as well as crimped cable ends up to 4 mm² (11 AWG). Outer metal cap with platinum finish.

Datasheet WBT-0705 (pdf-file)

The latest offspring pole terminals WBT-0703 and WBT-0708 are dignified offshoots of their big sisters WBT-0705 and WBT-0710. Only by dropping the gold plated decorative covering rings and pressure nut caps we were able to reduce their costs by as much as 50%.

WBT-0703 Cu, Nextgen

With the same manufacturing design as the WBT-0703 Ag but created using 99.996% pure oxygen free copper. The connector is then plated with a single layer of 24k gold to protect against oxidation.

WBT-0707 Cu, Nextgen

The latest offspring pole terminals WBT-0703 and WBT-070) are dignified offshoots of their big sisters WBT-0705 and WBT-0710. Only by dropping the gold plated decorative covering rings and pressure nut caps we were able to reduce their costs by as much as 50%.

WBT-0702.11, Signature

Comparable design as the WBT-0702.01 (see below) except it is manufactured using cold rolled 68% copper alloy. The connector is then plated with a single layer of 24k Gold to protect against oxidation. Finally, it is polished by hand to give an extreme finish.

Datasheet WBT-0702.11 (pdf-file)

WBT-0730.11, Signature

With the same manufacturing design as the WBT-0730.01 (see below) but created using cold rolled 68% copper alloy. The connector is then plated with a single layer of 24k Gold to protect against oxidation. Finally, it is polished by hand to give an extreme finish.

Datasheet WBT-0730 (pdf-file)

WBT-0730.01, Topline

A 200 Ampere continuous current rating makes this connector sufficient for most functions. Spade connectors are securely held with a patented high compression design. Wire with a diameter of 6mm² (10AWG) can also be accepted. Accepts 4mm² banana plugs.


Datasheet WBT-0730.01 (pdf-file)

Torx size 6 set screw not included

WBT binding posts

A binding post from WBT is truly a functional work of art and a symbol of quality. It is no wonder WBT binding posts are found as OEM parts on some of the world's finest audio equipment. WBT binding posts are a true five-way design and will accept 6mm (1/4") or 8mm (5/16") spades, 4mm bananas, bare wire or wire prepared with a WBT crimp sleeve (up to 6mm [10 AWG]). The two-piece tightening nut feature ensures secure attachment of spades without a wrench. In addition, the posts offer dual termination, solder or WBT crimp technique termination (torx screw has to be ordered separately) to suit your needs. WBT binding posts are available in economy, midline and topline versions to fit every budget. WBT binding posts can be mounted in panels a minimum of .8mm (1/32") thick and a maximum of 10mm (1/2") thick with the proper mounting insulation. To accommodate thicker panels, incorporate the WBT-0716 deep panel mounting kit.

The Nextgen Signature Series

WBT-0710 NextGen Signature Series is brand-spanking new. WBT Nextgen stands for a new generation of connectors in which the strict separation of signal transmission and mechanical stability has permitted the use of the most ideal materials. Pure copper and/or fine silver are the best known electrical conductors for signal transmission. However, due to their mechanical limitations their use has only now been made possible through their ingenious combination with high performance plastics. The core of the new WBT-0710 binding post is not only made from pure copper or fine silver but it is also designed from one piece so that all unnecessary transition resistance is omitted. The signal conductor is embedded in a matrix of glass fibre and mineral strengthened plastic and strain relief is achieved by means of a non-magnetic stainless steel strut. The clever angular alignment of the signal conductor allows the secure fitting of spades, banana plugs and crimped cable ends. A damping ring made from elastomer prevents vibration at the contact level. On this basis, the construction is electrically insulated from the start. Design elements out of brass give the WBT-0710 binding post the expected appearance and feel of WBT products, without impairing the electrical safety. In this way, the WBT-0710 nextgen conforms to all current norms and safety regulations. With a 30 amp continuous and a 500 amp power impulse current capability all concerns are satisfied. The WBT-0710 Nextgen provides the theoretically maximum possible conductivity with the mechanical quality to be expected from WBT.