Miflex KPCU-01 capacitors
Copper foil paper/polypropylene in oil Capacitors


The KPCU are specifically designed for Audio use. They are close rivals to the alternative Copper foil capacitors on the market and their competitive price and performance will ensure a popular position in the market place. Great for use as a signal or cross over capacitors.











Miflex KPCU-01 (600V),
with twisted copper leads
Value

  
Stock
Dimensions (D x L)
Price ex.VAT
Price incl .VAT
0,1uF  
•
24 mm x 50 mm
21.03
25.45
0,22uF  
•
30 mm x 50 mm
24.59
29.75
0,33uF  
•
36 mm x 50 mm
29.58
35.80
0,47uF  
•
44 mm x 50 mm
38.13
46.14
1,0uF  
•
44 mm x 70 mm
85.68
103.68






Miflex KPCU-01 capacitors.

The KPCU capacitors from Miflex SA, Poland are new to the audio market. These beautifully constructed capacitors feature a paper and polypropylene dielectric in a specially designed configuration with an electrode of high purity copper foil. The coils are oil-impregnated utilising a vacuum-based technology, The housing is an insulated resin paper tube. The internals are incased in a potting compound reducing the influence of external vibrations.

Characteristics:

• Insulated resin tube
• Paper and polypropylene mix dielectric
• High purity copper foil electrode
• Axial leadouts
• Leadouts are twisted copper (2 x 0.8mm diameter wires)
• 600 VDC rated
• Tolerance: 5%
• Dissipation factor :0.0035 at 1Khz
• RoHS compliant

Application Notes:

For best results keep capacitors as cool as possible, use common sense. Do not place next to or touching hot resistors or under-chassis signal tubes that get hot etc. This is good practice to follow with any capacitors, especially paper capacitors. Generally for every 10 degree C increase, component life is diminished by half.

The line on the label (at the shorter lead-out end) indicates the outer foil. This should be connected to the point of lowest impedance/signal output / AC end.